How to Obtain Temporary Power for Construction Sites
How to Obtain Temporary Power for Construction Sites
Are you getting ready to set up a construction site so that your construction company can get down to business and start a new project? If so, you’re going to need to make sure that your site has temporary power first.
It’s impossible for construction companies to operate successful sites without temporary power. They need to rely on the power to use a lot of the equipment and tools that they’ll have on their sites.
The problem, though, is that getting temporary power for construction sites is often easier said than done. It takes a ton of careful planning to bring temporary power into a construction site.
Want to get a first-hand look at how it’s done? Here is a step-by-step guide that will help you secure temporary power for construction sites.
Begin by Figuring Out How Much Power You’ll Need on Your Construction Site
How much power is your construction site going to need?
If your site is going to be relatively small, you might be able to get away with using a generator. There are plenty of used generators for sale that will work just fine for a construction site that’s on the smaller side. A natural gas generator or a diesel generator will both get the job done.
But if your site is going to be very big with lots of trailers, equipment, etc. on it, a generator or even several generators isn’t going to cut it. You’re going to need to hire a temporary power company to come in and install an entire temporary power system for you.
This is often the best solution for those trying to obtain temporary power for construction sites. It’ll ensure that you don’t ever run out of power on your site at any point.
Consider Contacting Several Temporary Power Companies to Provide You With Quotes
If you decide you’re going to need a temporary power system on your construction site, get in touch with at least a few temporary power companies. These companies specialize in delivering temporary power for construction sites.
You should search for temporary power companies in your general area and have them come down to your construction site to take a look at it. They’ll be able to discuss your specific temporary power needs with you so that they can provide you with a quote for their services.
You can then compare the quotes from different temporary power companies to see which ones will be able to deliver the best deals to you. It’ll help you score a great deal in the end.
Decide How You’re Going to Design Your Construction Site to Accommodate a Temporary Power System
Regardless of which temporary power company you choose to go with, you’re going to need to make sure that you put a foolproof plan into place when it comes to designing your temporary power system. You’ll need to lay out where your trailers, equipment, etc. are going to go and make sure you’ll be able to provide power to them.
If you’ve never gone through this process before, it’ll help to have an experienced temporary power company on your side. They can show you where you should put everything to simplify your temporary power system as much as possible.
Secure the Proper Permits to Install Temporary Power for Construction Sites
In addition to helping you design a temporary power system for construction sites, the company that you decide to work with should also help you pull the proper permits for your site. It’s not legal to set up a temporary power system without the right permits.
Your temporary power company should be well-versed as far as pulling the right permits is concerned. You can avoid unnecessary fines and delays in your construction project by making sure you have the correct permits on hand.
Allow Your Temporary Power Company to Step In and Install a Temporary Power System
After your temporary power company has shown you the most efficient way to design your construction site and secured the right permits for it, it’ll be time for them to get to work. They’ll ask you to step back and give them access to your site so that they can begin piecing together your temporary power system.
Most temporary power companies should be able to do this within just a day or two. They’ll run power to the right parts of your site and do it in a way that won’t disrupt you once you get to work.
Arrange to Have Your Construction Site’s Temporary Power System Inspected
Once a temporary power company is all done installing your temporary power system, you’ll need to have the system inspected by your city. They’ll visit your construction site to make sure everything is up to code.
You should not begin working on your site until you’ve been approved to do so. As long as your temporary power company did its job, you shouldn’t have to worry about passing your inspection with flying colors.
Start Using Your Construction Site’s Temporary Power System for as Long as You Need It
When everything else is all said and done, you’ll be left with a temporary power system that you can use for as long as you need to. Whether your project is going to take a few weeks, a few months, or even a few years, your temporary power system should keep on ticking.
If you notice any issues with it, you’ll just want to be sure to reach out to your temporary power system. They can troubleshoot your problems and keep your system up and running.
Could Your Next Construction Site Benefit From Temporary Power?
Without access to temporary power for construction sites, your construction company might be limited in what you can do. You can get around this by bringing in generators to your site or by working with a reputable temporary power company.
Either way, you’ll provide yourself with the power you need to pull off all your construction projects. It’ll make life so much easier on you and your employees.
Browse through the other articles on our blog to get more construction tips and tricks.
